Dead weight tester high performance BH2-300B DP
huile
reference : BH2-300B DP
Technical specifications
- measuring : 1 to 300 bar / 10 to 4000 PSI / 10 to 30000 kPa
- uncertainly of the pressure measured by the dead weight : Piston LP (1-60 bar) = 0.001 + 1x10-4 x P* / Piston HP (60-300 bar) = 0.0015+1x10-4 x P* (*with P in bar)
- accuracy : 0.01% of the scale / option : 0.007% if certificate COFRAC or DKD
- weight of the DWT without weights : 22 Kg
- generator base : CH2-1250B
- fluid : Oil H40 - fluid density : 860 kg/m3
- typical piston section : BP : 78.4472 mm² / HP : 15.6852 mm²
- piston/cylinder/pipe material : P:BP = treated steel + HP = carbide tungstene / C = treated steel
- number of pistons : 2
Options
To be specified when ordering :
- Choice of the unit of the principal set of weights: Bar, PSI, KPa etc...
- Standard gravity (9.80665m/s²) or special gravity (indicate the desired value)
Options available :
- Intermediaite set of weights and/or additional principael set of weights for different units
- A calibration certificate COFRAC or DKD/DAkkS.
- Option OP0004 : Motorization (drive of rotating masses) / Visualization (piston position by indicator lights)
- Option OP0301 : Calculator module with dynamic visualization of the position of the piston, automatic display of the pressures generated by the dead weight according to the temperature, the atmospheric pressure and the hygrometry, with data transfer to a computer for total traceability and calibration certificate edition.
- Adaptation of corrosive products such as skydroll, brake fluid, etc.
additional informations :
- Delivery details : a manual are provided in English and French with the device + a factory calibration certificate traceable to the national standards + the data sheet + 0.5 liter of mineral Oil with safety sheet
- Maintenance : Our technical service department is at your disposition for the revision, calibration or service after sale of your unit – Calibration device recommended every 2 or 5 years depending on your use.
associated products
BH2-300B SP
BH2-400B DP
BH2-400B SPother products
Option calculator -sensors OP0301
- reference : OP0301
Option OP0301 integrated automatically on the BH4 or BA4 ranges or as an option on the BA2 or BH2 ranges. This calculatot integrates sensors, a calculator and the motorization and the visualization.
Option moto-visu OP0004
- reference : OP0004
Option motorization and visualization with Leds for your dead weight tester range BH2 or BA2