If you are looking for traceability and accuracy, this range of prymary standards is the best !

These primary standards are intended for testing, adjusting and calibrating pressure measuring instruments. Very high precision, they are suitable for calibration laboratories or industries with intensive or regular calibrations.

  • calibration : Our dead weight tester are calibrated under the following conditions of use : Temperature 20°C - Pressure atmos. 1013.25 hPa - Humidity 50% - acceleration 9.80665 m/s²
  • fluid : Dry air - gas connection ¼ cylindrical female - This balance needs to be connected to a pressure source.
  • tank : 20 cm3 for models with lubrification
  • seat adjustment : Leveling bubble and adjustable feet
  • connection for the instrument to be test : adaptor G1/2 standard – other optional adaptors
  • motorization of weights : motorization of the set of weight by electric system
  • crankcase : Light alloy aluminium AG3 + high-resistance paint
  • capstan : removable for transport
  • piston/cylinder : single
  • weights : Ergonomic shape of the masses, easy loading of the masses on the bell - Marking corresponding with the measuring unit choose (bar, mbar, KPa, PSI etc..) – Gravity : standard (9.80665 m/s² or local gravity at your choice without supplement
  • operating temperature : 18 to 28°C - 64 to 82°F
Filter your seach by measurement

Results for  : Pneumatic > Pneumatics dead weight testers > Automatics dead weight testers BA4

BA4-60B
air

BA4-60B

  • measuring : from 0.5 bar to 60 bar  / from 5 PSI produits.à 800 PSI
  • reference : BA4-60B
  • number of pistons : 1




 

See the details
BA4-120B
air

BA4-120B

  • measuring : from 1 bar to 120 bar  / from 10 PSI produits.à 1600 PSI
  • reference : BA4-120B
  • number of pistons : 1
See the details
BA4-200B
air

BA4-200B

  • measuring : from 2.5 bar to 200 bar  / from 25 PSI produits.à 3000 PSI
  • reference : BA4-200B
  • number of pistons : 1
See the details